[2016.07 NEW]Instant Cisco 400-051 Practice Test PDF Free Download in Braindump2go[NQ31-NQ40]

2016.07 Cisco Official:

400-051 Exam Questions New Updated!

Braindump2go Offers Free 400-051 PDF & 400-051 VCE 454Q&As for Free Download Today!

NEW QUESTION 31 – NEW QUESTION 40:

1.|2016.07 New Cisco 400-051 PDF & 400-051 VCE 454Q&As Dumps:http://www.braindump2go.com/400-051.html [100% Exam Pass Guaranteed!]
2.|2016.07 Latest Cisco 400-051 Exam Questions PDF – Google Drive:
https://drive.google.com/folderview?id=0B272WrTALRHcV0V4N2pvOUpFcUk&usp=sharing

QUESTION 31
Refer to the exhibit. Ephone 1 has three active calls. The first two calls were inbound calls, which the user put on hold to place a third call outbound. What will happen on ephone 1 when a fourth call arrives for extension 2001?

A.    The fourth call will be delivered to ephone 1 because it only received two inbound calls, one call less than
the busy-trigger-per-button setting.
B.    The fourth call will be delivered to ephone 1 because the huntstop channel setting is not yet saturated.
C.    The fourth call will be delivered to ephone 1 because it can handle up to five calls on each button.
D.    The fourth call will be held temporarily by the IOS Software until ephone 1 disconnects one of the active calls.
E.    The fourth call will not be delivered and the caller will hear a user busy tone.

Answer: E
Explanation:
Because on line maximum 4 calls can be placed when user put the call on hold is consume a channel and reach the maximum number of calls on line.

QUESTION 32
Refer to the exhibit. How many simultaneous inbound calls can be handled by these two IP phones?

A.    2
B.    4
C.    6
D.    9
E.    10

Answer: A
Explanation:
The line is configured as shared line so it will support maximum two calls at a time.

QUESTION 33
Refer to the exhibit. IP phone 1 has the MAC address 11111.1111.1111, while IP phone 2 has the MAC address 2222.2222.2222. The first two incoming calls were answered by IP phone 1, while the third incoming call was answered by IP phone 2. What will happen to the fourth incoming call?

A.    Both phones will ring, but only IP phone 2 can answer the call.
B.    Both phones will ring and either phone can answer the call.
C.    Only IP phone 2 will ring and can answer the call.
D.    Neither phone will ring and the call will be forwarded to 2100.
E.    Neither phone will ring and the call will be forwarded to 2200.

Answer: B
Explanation:
In shared line configuration phone share the same line so it is possible for any phone to answer the call.

QUESTION 34
Which statement describes the question mark wildcard character in a SIP trigger that is configured on Cisco Unity Express?

A.    It matches any single digit in the range 0 through 9.
B.    It matches one or more digits in the range 0 through 9.
C.    It matches zero or more occurrences of the preceding digit or wildcard value.
D.    It matches one or more occurrences of the preceding digit or wildcard value.
E.    It matches any single digit in the range 0 through 9, when used within square brackets.

Answer: C

QUESTION 35
Assume the IP address of Cisco Unity Express is 10.1.1.1. Which URL provides Cisco Unity Express end users with a GUI interface to access and manage their messages and mailbox settings?

A.    http://10.1.1.1/Web/Common/Login.do
B.    http://10.1.1.1/ciscopca
C.    http://10.1.1.1/user
D.    http://10.1.1.1/inbox
E.    http://10.1.1.1/

Answer: C
Explanation:
For user access cisco unity has predefined url and it is http://10.1.1.1/user

QUESTION 36
Refer to the exhibit. Your customer sent you this debug output, captured on a Cisco IOS router (router A), to troubleshoot a problem where all H.323 calls that originate from another Cisco IOS router (router B) are being dropped almost immediately after arriving at router A. What is the reason for these disconnected calls?

A.    Calls were unsuccessful because of internal, memory-related problems on router A.
B.    Calls were rejected because the called number was denied on a configured class of restriction list
on router A.
C.    Calls were rejected because the VoIP dial peer 1002 was not operational.
D.    Calls were unsuccessful because the router B IP address was not found in the trusted source IP
address list on router A.
E.    Calls were rejected by router A because it received an admission reject from its gatekeeper because
of toll fraud suspicion.

Answer: D
Explanation:
Trusted source IP address list on router is a list which secure the connectivity of router if it is enabled then we need to give the trusted ebtry for any route to reach.

QUESTION 37
Which type of mailbox on Cisco Unity Express can play a user greeting and disconnect the call, but cannot take or send messages?

A.    PIN-less mailbox
B.    announcement-only mailbox
C.    general delivery mailbox
D.    call-handling mailbox
E.    personal mailbox

Answer: B
Explanation:
Announcement-only mailbox are set for those user who only want the caller to listen the announcement and leave his message according to the announcement.

QUESTION 38
Refer to the exhibit. Assume the B-ACD configuration on a Cisco IOS Cisco Unified Communications Manager Express router is operational. What will happen to a call in queue that was not answered by any member of the hunt group after the maximum amount of time allowed in the call queue expires?

A.    The call will be forwarded to extension 2120.
B.    The call will be forwarded to extension 2220.
C.    The call will be forwarded to extension 2003.
D.    The call will be disconnected with user busy.
E.    The call will be forwarded to 2100.

Answer: B
Explanation:
As we can see in the configuration 2220 is configured as voice mail forwarding extension so the call will forward to voice mail.

QUESTION 39
Refer to the exhibit. Assume the B-ACD configuration on a Cisco IOS Cisco Unified Communications Manager Express router is operational. What will happen to a new call that enters the call queue when there are already two calls in queue?

A.    The call will be forwarded to extension 2120.
B.    The call will be forwarded to extension 2220.
C.    The call will be forwarded to extension 2003.
D.    The call will be disconnected with user busy.
E.    The call will be forwarded to 2100.

Answer: C
Explanation:
That is because queue over flow is forwaded to 2003 and maximum number of calls in queuq is configured as two.

QUESTION 40
When multiple greetings are enabled on Cisco Unity Express, which greeting will take the highest precedence?

A.    standard
B.    meeting
C.    busy
D.    closed
E.    internal

Answer: B
Explanation:
Meeting greeting has highest priority because it is set by user when he don’t want to take the call and notice the caller he is online.


!!!RECOMMEND!!!

2016 Jul. Braindump2go New 400-051 Exam PDF and VCE Dumps 454Q&As Instant Download:

http://www.braindump2go.com/400-051.html [100% Exam Pass Promised!]

 

2016 Jul. Cisco 400-051 New Exam Questions – Google Drive:
https://drive.google.com/folderview?id=0B272WrTALRHcV0V4N2pvOUpFcUk&usp=sharing

[2016.07 NEW]Instant Cisco 400-051 VCE Exam Dumps Free Download in Braindump2go[NQ21-NQ30]

2016.07 Cisco Official:

400-051 Exam Questions New Updated!

Braindump2go Offers Free 400-051 PDF & 400-051 VCE 454Q&As for Free Download Today!

NEW QUESTION 21 – NEW QUESTION 30:

1.|2016.07 New Cisco 400-051 PDF & 400-051 VCE 454Q&As Dumps:http://www.braindump2go.com/400-051.html [100% Exam Pass Guaranteed!]
2.|2016.07 Latest Cisco 400-051 Exam Questions PDF – Google Drive:
https://drive.google.com/folderview?id=0B272WrTALRHcV0V4N2pvOUpFcUk&usp=sharing

 

QUESTION 21
Refer to the exhibit. A user is going through a series of dialing steps on a SIP Type B IP phone (for example, a Cisco 7975) to call an SCCP IP phone. Both phones are registered to the same Cisco Unified Communications Manager cluster. Assuming the calling SIP phone is associated with a SIP Dial Rule with a pattern value of 2001, which statement about the call setup process of this call is true?

A.Each digit will arrive at Cisco Unified Communications Manager in a SIP NOTIFY message as a KPML
event, and Cisco Unified Communications Manager will extend the call as soon as the collected digits
match the extension of the SCCP IP phone, bypassing class of service configuration on both IP phones.
B.Each digit will arrive at Cisco Unified Communications Manager in a SIP NOTIFY message as a KPML
event. When the collected digits match the extension of the SCCP IP phone, Cisco Unified Communications
Manager
will extend the call only if the class of service configuration on both phones permits this action.
C.As soon as the user selects the Dial softkey, the SIP IP phone will forward all digits to Cisco Unified
Communications Manager in a SIP INVITE message. Cisco Unified Communications Manager will extend
the call as soon as the collected digits match the extension of the SCCP IP phone, bypassing class of service
configuration on both IP phones.
D.As soon as the user selects the Dial softkey, the SIP IP phone will forward all digits to Cisco Unified
Communications Manager in a SIP INVITE message. Cisco Unified Communications Manager will extend
the call only if class of service configuration on both phones permits this action.
E.The SIP IP phone will wait for the interdigit timer to expire, and then send all digits to Cisco Unified
Communications Manager in a SIP INVITE message. Cisco Unified Communications Manager will extend
the call as soon as the collected digits match the extension of the SCCP IP phone, bypassing class of
service configuration on both IP phones.

Answer: D
Explanation:
Cisco Type B SIP Phones offer functionality based SIP INVITE Message. Every key the end user presses triggers an individual SIP message. The first event is communicated with a SIP INVITE, but subsequent messages use SIP NOTIFY messages. The SIP NOTIFY messages send KPML events corresponding to any buttons or soft keys pressed by the user. Cisco Type B SIP IP Phones with SIP dial rules operate in the same manner as Cisco Type A phones with dial rules.

QUESTION 22
What does a comma accomplish when it is used in a SIP Dial Rule pattern that is associated with a Cisco 9971 IP Phone that is registered to Cisco Unified Communications Manager?

A.It inserts a 500-millisecond pause between digits.
B.It causes the phone to generate a secondary dial tone.
C.It is a delimiter and has no significant dialing impact.
D.It indicates a timeout value of 5000 milliseconds.
E.It is an obsolete parameter and will be ignored.

Answer: B
Explanation:
Comma is accepted in speed dial as delimiter and pause. -Comma used to delineate dial string, FAC, CMC, and post connect digits For post connect digits, commas insert a 2 second delay Commas may be duplicated to create longer delays

QUESTION 23
Which Call Admission Control mechanism is supported for the Cisco Extension Mobility Cross Cluster solution?

A.Location CAC
B.RSVP CAC
C.H.323 gatekeeper
D.intercluster Enhanced Location CAC
E.visiting cluster’s LBM hub

Answer: B
Explanation:
Configuring extension mobility cross cluster (EMCC) is nothing you should take lightly. EMCC requires a lot of configuration parameters including the exporting and importing of each neighbor cluster’s X.509v3 digital certificates. EMCC is supported over SIP trunks only. Presence is another feature that’s only supported over SIP trunks. If you want to be able to perform scalable Call Admission Control (CAC) in a distributed multi- cluster call processing model, you will need to point an H.225 or Gatekeeper controlled trunk to an H.323 Gatekeeper for CAC… but if you want to support presence and EMCC between clusters and maintain CAC.

QUESTION 24
Which two Cisco Unified Communications Manager SIP profile configuration parameters for a SIP intercluster trunk are mandatory to enable end-to-end RSVP SIP Preconditions between clusters? (Choose two.)

A.Set the RSVP over SIP parameter to Local RSVP.
B.Set the RSVP over SIP parameter to E2E.
C.Set the SIP Rel1XX Options parameter to Disabled.
D.Set the SIP Rel1XX Options parameter to Send PRACK If 1xx Contains SDP.
E.Set the SIP Rel1XX Options parameter to Send PRACK for All 1xx Messages.
F.Check the Fall Back to Local RSVP check box.

Answer: BD
Explanation:
Each Unified Communications Manager cluster and Unified CME should have the same configuration information. For example, Application ID should be the same on each Unified Communications Manager cluster and Unified CME. RSVP Service parameters should be the same on each Unified Communications Manager cluster.

QUESTION 25
What is the number of directory URIs with which a Cisco Unified Communications Manager directory number can be associated?

A.1
B.up to 2
C.up to 3
D.up to 4
E.up to 5

Answer: E
Explanation:
Cisco Unified Communications Manager supports dialing using directory URIs for call addressing. Directory URIs look like email addresses and follow the username@host format where the host portion is an IPv4 address or a fully qualified domain name. A directory URI is a uniform resource identifier, a string of characters that can be used to identify a directory number. If that directory number is assigned to a phone, Cisco Unified Communications Manager can route calls to that phone using the directory URI. URI dialing is available for SIP and SCCP endpoints that support directory URIs.

QUESTION 26
Which Cisco Unified Communications Manager partition will be associated with a directory URI that is configured for an end user with a primary extension?

A.null
B.none
C.directory URI
D.default
E.any partition that the Cisco Unified Communications Manager administrator desires

Answer: C
Explanation:
Cisco Unified Communications Manager supports dialing using directory URIs for call addressing. Directory URIs look like email addresses and follow the username@host format where the host portion is an IPv4 address or a fully qualified domain name. A directory URI is a uniform resource identifier, a string of characters that can be used to identify a directory number. If that directory number is assigned to a phone, Cisco Unified Communications Manager can route calls to that phone using the directory URI. URI dialing is available for SIP and SCCP endpoints that support directory URIs.

QUESTION 27
Which Call Control Discovery function allows the local Cisco Unified Communications Manager to listen for advertisements from remote call-control entities that use the SAF network?

A.CCD advertising service
B.CCD requesting service
C.SAF forwarder
D.SAF enabled trunks
E.CCD registration service

Answer: B
Explanation:
SAF and CCD will allow large distributed multi-cluster deployments to have the directory number (DN) ranges of each call routing element advertised dynamically over SAF. Cisco routers act as SAF Forwarders (SAFF), while the call routing elements (e.g. CUCM) act as clients that register with the routers to advertise their DN ranges and listen to the advertisements of other routers.

QUESTION 28
Which codec complexity mode, when deployed on Cisco IOS routers with DSPs using the C5510 chipset, supports the most G.711 calls per DSP?

A.Low
B.Medium
C.High
D.Secure
E.Flex

Answer: E
Explanation:
The flex parameter allows the complexity to automatically adjust to either medium or high complexity depending on the needs of a call. For example, if a call uses the G.711 codec, the C5510 chipset automatically adjusts to the medium-complexity mode. However, if the call uses G.729, the C5510 chipset uses the high complexity mode

QUESTION 29
When DSP oversubscription occurs on a Cisco IOS router using DSP modules that are based on the C5510 chipset, what will happen when an analog phone connected to a FXS port goes off-hook?

A.A fast busy tone will be played.
B.A slow busy tone will be played.
C.A network busy tone will be played.
D.A dial tone will be played, but digits will not be processed.
E.No tone will be played.

Answer: E
Explanation:
When DSP oversubscription occurs for both analog ports and digital ports, except PRI and BRI. FXO signaling and application controlled endpoints are not supported. This feature does not apply to insufficient DSP credits due to mid-call codec changes (while a call is already established).

QUESTION 30
Refer to the exhibit. How many simultaneous outbound calls are possible with this Cisco Unified Communications Manager Express configuration on these two phones?

A.6
B.7
C.8
D.9
E.11

Answer: C
Explanation:
Ephone is configured as octo line so maximum call number is 8 and it will be devided between lines.


!!!RECOMMEND!!!

2016 Jul. Braindump2go New 400-051 Exam PDF and VCE Dumps 454Q&As Instant Download:

http://www.braindump2go.com/400-051.html [100% Exam Pass Promised!]

 

2016 Jul. Cisco 400-051 New Exam Questions – Google Drive:
https://drive.google.com/folderview?id=0B272WrTALRHcV0V4N2pvOUpFcUk&usp=sharing

[2016.07 NEW]Free 400-051 Exam Dump VCE Offered by Braindump2go[NQ11-NQ20]

2016.07 Cisco Official:

400-051 Exam Questions New Updated!

Braindump2go Offers Free 400-051 PDF & 400-051 VCE 454Q&As for Free Download Today!

NEW QUESTION 11 – NEW QUESTION 20:

1.|2016.07 New Cisco 400-051 PDF & 400-051 VCE 454Q&As Dumps:http://www.braindump2go.com/400-051.html [100% Exam Pass Guaranteed!]
2.|2016.07 Latest Cisco 400-051 Exam Questions PDF – Google Drive:
https://drive.google.com/folderview?id=0B272WrTALRHcV0V4N2pvOUpFcUk&usp=sharing

 

QUESTION 11
Which two responses are examples of client error responses in SIP protocol? (Choose two.)

A.    302 Moved Temporarily
B.    404 Not Found
C.    503 Service Unavailable
D.    502 Bad Gateway
E.    604 Does Not Exist Anywhere
F.    408 Request Timeout

Answer: BF
Explanation:
Client Error (400 to 499)–Request contains bad syntax or cannot be fulfilled at this server. This class of 400 to 499 contains only error messages.

QUESTION 12
Which H.245 information is exchanged within H.225 messages in H.323 Fast Connect?

A.    Terminal Capability Set
B.    Open Logical Channel
C.    Master-Slave Determination
D.    Call Setup
E.    Call Progress

Answer: B
Explanation:
With the standard H.245 negotiation, the two endpoints need three round- trips before they agree on the parameters of the audio/video channels (1. master/slave voting, 2. terminal capability set exchange, and finally, 3. opening the logical channels). In certain situations and especially with high-latency network links, this can last too long and users will notice the delay.

QUESTION 13
Which two compression formats for high-definition video have technical content that is identical to H.264? (Choose two.)

A.    MPEG-4 Part 10
B.    MPEG-4 Part 14
C.    MPEG-2 Part 7
D.    AVC
E.    VC3
F.    VP8

Answer: AD
Explanation:
MPEG-4 Part 10, also known as MPEG-4 AVC (Advanced Video Coding), is actually defined in an identical pair of standards maintained by different organizations, together known as the Joint Video Team (JVT). While MPEG-4 Part 10 is a ISO/IEC standard, it was developed in cooperation with the ITU, an organization heavily involved in broadcast television standards. Since the ITU designation for the standard is H.264, you may see MPEG-4 Part 10 video referred to as either AVC or H.264. Both are valid, and refer to the same standard.

QUESTION 14
Refer to the exhibit. A user is going through a series of dialing steps on an SCCP IP phone (extension 1001) to call another SCCP IP phone (extension 2003). Both phones are registered to the same Cisco Unified Communications Manager cluster. Which user inputs are sent from the calling IP phone to the Cisco Unified Communications Manager, in forms of SCCP messages, after the user pressed the Dial softkey? Note that the commas in answer choices below are logical separators, not part of the actual user input or SCCP messages.

A.    A separate SCCP message is sent to Cisco Unified Communications Manager for each of the following
user inputs: 2, 0, 0, 3.
B.    A separate SCCP message is sent to Cisco Unified Communications Manager for each of the following
user inputs: 2, 0, 1, <<, 0, 3.
C.    A single SCCP message is sent to Cisco Unified Communications Manager to report that digits 2003
have been dialed.
D.    A single SCCP message is sent to Cisco Unified Communications Manager to report that digits 201<<03
have been dialed.
E.    A separate SCCP message is sent to Cisco Unified Communications Manager for each of the following
user inputs: 2, 0, 1, <<, 2, 0, 0, 3.

Answer: C
Explanation:
After the user delete phone stop the digit by digit dialing and send it as a whole setup.

QUESTION 15
How are DTMF digits transported in RFC 2833?

A.    In the RTP stream with the named telephone events payload format.
B.    In the RTP stream with the regular audio payload format.
C.    In SIP NOTIFY messages.
D.    In SIP INFO messages.
E.    In SIP SUBSCRIBE messages.

Answer: A
Explanation:
DTMF digits and named telephone events are carried as part of the audio stream, and MUST use the same sequence number and time-stamp base as the regular audio channel to simplify the generation of audio waveforms at a gateway. The default clock frequency is 8,000 Hz, but the clock frequency can be redefined when assigning the dynamic payload type.

QUESTION 16
Refer to the exhibit. Which DTMF relay method is advertised when the originating SIP gateway sends an INVITE message with a Call-Info header shown?
 

A.    RFC 2833
B.    SIP INFO
C.    SIP NOTIFY
D.    SIP KPML
E.    In-band audio

Answer: C
Explanation:
You can develop user-specific applications that reside on your network entity and have the ability to subscribe for event services supported by the IMG. If the network entity wants the ability to detect an entered DTMF digit (only telephone event of “###” are currently supported) from the TDM-side of a call to the IP side of a call, the entity can subscribe to the IMG for these events and receive SIP NOTIFY events containing the digit event.

QUESTION 17
What is the maximum length of any numeric geographic area address in ITU recommendation E.164?

A.    15
B.    18
C.    21
D.    22
E.    25

Answer: A
Explanation:
E.164 defines a general format for international telephone numbers. Plan- conforming numbers are limited to a maximum of 15 digits. The presentation of numbers is usually prefixed with the character + (plus sign), indicating that the number includes the international country calling code (country code), and must typically be prefixed when dialing with the appropriate international call prefix, which is a trunk code to reach an international circuit from within the country of call origination.

QUESTION 18
According to ITU-T E.164 recommendations, which two fields in the National Significant Number code may be further subdivided? (Choose two.)

A.    Country Code
B.    National Destination Code
C.    Subscriber Number
D.    Regional Significant Number
E.    Local User Code
F.    National Numbering Plan

Answer: BC
Explanation:
A telephone number can have a maximum of 15 digits .The first part of the telephone number is the country code (one to three digits) .The second part is the national destination code (NDC). The last part is the subscriber number (SN). The NDC and SN together are collectively called the national (significant) number

QUESTION 19
Refer to the exhibit. A user is going through a series of dialing steps on a SIP Type B IP phone (for example, a Cisco 7975) to call an SCCP IP phone. Both phones are registered to the same Cisco Unified Communications Manager cluster. Assuming that the calling SIP phone is not associated with any SIP dial rules, which statement about how digits are forwarded to Cisco Unified Communications Manager for further call processing is true?

A.    Each digit is sent to Cisco Unified Communications Manager in a SIP NOTIFY message KPML event, at the
time that the user enters the digit on the keypad.
B.    The SIP IP phone will wait for the interdigit timer to expire, or for the Dial softkey to be selected before
sending each digit to Cisco Unified Communications Manager as a separate KPML event in a SIP NOTIFY
message.
C.    The SIP IP phone will wait for the interdigit timer to expire, or for the Dial softkey to be selected before
sending all digits to Cisco Unified Communications Manager in a SIP INVITE message.
D.    The SIP IP phone will wait for the interdigit timer to expire or for the Dial softkey to be selected before sending
the first digit in a SIP INVITE and the subsequent digits in SIP INFORMATION messages.
E.    The SIP IP phone will send all digits to Cisco Unified Communications Manager in a SIP INVITE message
as soon as the fourth digit is pressed.

Answer: A
Explanation:
KPML procedures use a SIP SUBSCRIBE message to register for DTMF digits. The digits themselves are delivered in NOTIFY messages containing an XML encoded body. And it is Out of Band DTMF

QUESTION 20
Refer to the exhibit. A user is going through a series of dialing steps on a SIP Type B IP phone (for example, a Cisco 7975) to call an SCCP IP phone. Both phones are registered to the same Cisco Unified Communications Manager cluster. Assuming the calling SIP phone is associated with a SIP dial rule with a pattern value of 2001, which statement about how digits are forwarded to Cisco Unified Communications Manager for further call processing is true?
 

A.    As each digit is pressed on the SIP IP phone, it is sent to Cisco Unified Communications Manager in
a SIP NOTIFY message as a KPML event.
B.    The SIP IP phone will wait for the interdigit timer to expire, and then send each digit to Cisco Unified
Communications Manager as a separate KPML event in a SIP NOTIFY message.
C.    The SIP IP phone will wait for the interdigit timer to expire, or for the Dial softkey to be selected before
sending all digits to Cisco Unified Communications Manager in a SIP INVITE message.
D.    The SIP IP phone will wait for the interdigit timer to expire, or for the Dial softkey to be selected before
sending the first digit in a SIP INVITE and the subsequent digits in SIP INFORMATION messages.
E.    The SIP IP phone will wait for the interdigit timer to expire, and then send all digits to Cisco Unified
Communications Manager in a SIP INVITE message.

Answer: E
Explanation:
Cisco Type B SIP Phones offer functionality based SIP INVITE Message. Every key the end user presses triggers an individual SIP message. The first event is communicated with a SIP INVITE, but subsequent messages use SIP NOTIFY messages. The SIP NOTIFY messages send KPML events corresponding to any buttons or soft keys pressed by the user. Cisco Type B SIP IP Phones with SIP dial rules operate in the same manner as Cisco Type A phones with dial rules.


!!!RECOMMEND!!!

2016 Jul. Braindump2go New 400-051 Exam PDF and VCE Dumps 454Q&As Instant Download:

http://www.braindump2go.com/400-051.html [100% Exam Pass Promised!]

 

2016 Jul. Cisco 400-051 New Exam Questions – Google Drive:
https://drive.google.com/folderview?id=0B272WrTALRHcV0V4N2pvOUpFcUk&usp=sharing

[2016.07 NEW]Braindump2go 400-051 Exam Dump VCE Free Instant Download[NQ1-NQ10]

2016.07 Cisco Official:

400-051 Exam Questions New Updated!

Braindump2go Offers Free 400-051 PDF & 400-051 VCE 454Q&As for Free Download Today!

NEW QUESTION 1 – NEW QUESTION 10:

1.|2016.07 New Cisco 400-051 PDF & 400-051 VCE 454Q&As Dumps:http://www.braindump2go.com/400-051.html [100% Exam Pass Guaranteed!]
2.|2016.07 Latest Cisco 400-051 Exam Questions PDF – Google Drive:
https://drive.google.com/folderview?id=0B272WrTALRHcV0V4N2pvOUpFcUk&usp=sharing

 

QUESTION 1
Which two SCCP call signaling messages are sent by an IP phone to Cisco Unified Communications Manager? (Choose two.)

A.    SoftKeyEvent
B.    OpenReceiveChannelAck
C.    StartMediaTransmission
D.    SelectSoftKeys
E.    CloseReceiveChannel
F.    StopTone

Answer: AB
Explanation:
This message indicates which soft key was pressed. Upon receipt of this mesage,CallManager invokesthe action associated with thepressed soft key. For example, if Hold was the pressed soft key,CallManager places the active call on user hold.In some trace files you might see a soft key number without the corresponding description. The following list defines each soft key number.

QUESTION 2
Which device is the initiator of a StationInit message in a Cisco Unified Communications Manager SDI trace?

A.    Cisco Unified Communications Manager
B.    MGCP gateway
C.    Cisco Music on Hold server
D.    SCCP IP phone
E.    SIP Proxy Server

Answer: D
Explanation:
StationInit means that an inbound Transmission Control Protocol (TCP) message
from a Skinny station reached CallManager. A Skinny station is any endpoint that uses the Skinny protocol to communicate with CallManager

QUESTION 3
Refer to the exhibit. You received this debug output to troubleshoot a Cisco IOS MGCP gateway problem at a customer site.
Which statement about this endpoint on the Cisco MGCP gateway is true?

A.    This endpoint is on a T1 Controller 0/1/0.
B.    This endpoint is on an E1 Controller 0/1/0.
C.    This endpoint is on a T1 Controller 0/1/1.
D.    This endpoint is on an E1 Controller 0/1/2.
E.    This endpoint is on an T1 Controller 0/1/2.

Answer: A

QUESTION 4
Refer to the exhibit. You received this debug output to troubleshoot a Cisco IOS MGCP gateway media-related problem at a customer site. What is the purpose of this message?

A.    The MGCP gateway is responding to an RQNT message from Cisco Unified Communications Manager
to poll the media capabilities on its endpoints.
B.    The MGCP gateway is responding to an AUEP message from Cisco Unified Communications Manager
to poll the media capabilities on its endpoints.
C.    The MGCP gateway is responding to an AUCX message from Cisco Unified Communications Manager
to poll the active calls on its endpoints.
D.    The MGCP gateway is responding to an MDCX message from Cisco Unified Communications Manager
during a call setup.
E.    The MGCP gateway is responding to a DLCX message from Cisco Unified Communications Manager
during a call setup.

Answer: E

QUESTION 5
To which SIP response class do the SIP response codes 300 to 399 belong?

A.    Provisional
B.    Client Failure
C.    Server Failure
D.    Successful
E.    Redirection

Answer: E
Explanation:
Redirection — further action needs to be taken in order to complete the request.
That is what this class implies.

QUESTION 6
Which SIP request method enables reliability of SIP 1xx response types?

A.    ACK
B.    PRACK
C.    OPTIONS
D.    CANCEL
E.    REGISTER

Answer: B
Explanation:
In order to achieve reliability for provisional responses, we do nearly the same thing.
Reliable provisional responses are retransmitted by the TU with an exponential backoff.
Those retransmissions cease when a PRACK message is received.
The PRACK request plays the same role as ACK, but for provisional responses.
There is an important difference, however. PRACK is a normal SIP message, like BYE.

QUESTION 7
Which SIP response is considered a final response?

A.    183 Session in Progress
B.    199 Early Dialog Terminated
C.    200 OK
D.    180 Ringing
E.    100 Trying

Answer: C
Explanation:
Indicates the request was successful.Wheather other options state the request is still in progress or request is intiated.

QUESTION 8
Which two SDP content headers can be found in a SIP INVITE message? (Choose two.)

A.    Expires
B.    Contact
C.    Connection Info
D.    Media Attributes
E.    Allow
F.    CSeq

Answer: CD
Explanation:
Connection info is optional field in sdp wheather Media attributes decide the codec and media type for that call.

QUESTION 9
Refer to the exhibit. If this SIP call is initiated using early offer, which SIP message will UA#2 use to communicate its media capability to UA#1?

A.    INVITE
B.    180 Ringing
C.    200 OK
D.    ACK
E.    RTP Media

Answer: C
Explanation:
In Early offer, SIP Send SDP in the invite , the other node will send the SDP in the 200 message.

QUESTION 10
Refer to the exhibit. If this SIP call is initiated using delayed offer, which SIP message will UA#1 use to communicate its media capability to UA#2?

A.    INVITE
B.    180 Ringing
C.    200 OK
D.    ACK
E.    RTP Media

Answer: D
Explanation:
In the Delayed Offer process, the calling does not send its offer in the SIP INVITE Message. The callee sends the offer within the SDP fields of its answer (SIP 200 OK). The calling answers within the ACK message.


!!!RECOMMEND!!!

2016 Jul. Braindump2go New 400-051 Exam PDF and VCE Dumps 454Q&As Instant Download:

http://www.braindump2go.com/400-051.html [100% Exam Pass Promised!]

 

2016 Jul. Cisco 400-051 New Exam Questions – Google Drive:
https://drive.google.com/folderview?id=0B272WrTALRHcV0V4N2pvOUpFcUk&usp=sharing

[2016.07 NEW]Free Downloading 400-051 PDF Dumps from Braindump2go.com[NQ396-NQ406]

2016.07 Cisco Official:

400-051 Exam Questions New Updated!

Braindump2go Offers Free 400-051 PDF & 400-051 VCE 454Q&As for Free Download Today!

NEW QUESTION 396 – NEW Question 406:

1.|2016.07 New Cisco 400-051 PDF & 400-051 VCE 454Q&As Dumps:http://www.braindump2go.com/400-051.html [100% Exam Pass Guaranteed!]
2.|2016.07 Latest Cisco 400-051 Exam Questions PDF – Google Drive:
https://drive.google.com/folderview?id=0B272WrTALRHcV0V4N2pvOUpFcUk&usp=sharing

QUESTION 396
Refer to the exhibit. An engineer is trying to provision CUCME with three 8841 phones.
However all phone fail to register.
Which two changes in the configuration would allow the phones to register? (Choose two)
 

A.    The registrar server command must be added under the voice register global configuration
B.    The IP address trusted authenticate command must be added under voice service voip
C.    The source-address command must be added under the voice register global configuration
D.    The local SIP proxy address must be configuration under the sip-ua configuration
E.    The registrar server command must be added under the sip section of voice service voip

Answer: CE

QUESTION 397
A collaboration engineer has been asked to implement secure real-time protocol between a Cisco Unified CM and SIP gateway. Which option is a consideration for this implementation?

A.    Only T.38 and Cisco fax protocol are supported
B.    SIP require the all the time be sent in GMT
C.    Call hold RE-INVITE is not supported
D.    SRTP is supported only in cisco IOS 15.x and higher

Answer: B

QUESTION 398
Refer to the exhibit. A collaboration engineer configures Cisco Unified CM location using G.711 and iLBC for each site. The bandwidth for each link is shown. Which two options represent the maximum concurrent number of calls supported from Grand Junction to Casper for each Codec?
(Choose two)
 

A.    20 G.711 calls
B.    18 G.711 calls
C.    36 iLBC calls
D.    42 iLBC calls
E.    11 G.711 calls
F.    51 iLBC calls

Answer: CE

QUESTION 399
A collaboration engineer is troubleshooting an MOH problem on a Cisco IOS SIP gateway. While searching through a debug ccsip message output, which three parameters in the SIP messages can be used to determine if the call was placed on hold? (Choose three)

A.    OPTIONS WITH 301 CALLHOLD
B.    INVITE WITH a=INACTIVE
C.    INVITE WITH a=SENDONLY
D.    OPTION WITH c=INACTIVE
E.    c=IN IP4 0.0.0.0
F.    BYE WITH A = CALLHOLD

Answer: BCE

QUESTION 400
Refer to the exhibit. A cisco collaboration engineer discovers that an instance of IOS media termination point (MTP) could not maintain stable registration with CUCM. Call manager traces is showing in the exhibit. What is the reason for the flapping registration?
 

A.    The CCM version on IOS configuration does not match the CUCM version.
B.    The IOS MTP is experiencing high CPU and is missing its keep-alive.
C.    A Firewall is blocking port 2000 intermittently between IOS Device and CUCM.
D.    Another IOS Media device is attempting to register with the same name.

Answer: D

QUESTION 401
A collaboration engineer is designing Cisco IM&P implementation to support instant messaging logging for compliance.
Which two external databases can be used to support that functionality? (Choose two.)

A.    Oracle database
B.    MySQL database
C.    Microsoft SQL database
D.    PostgreSQL database
E.    Informix SQL database

Answer: AD

QUESTION 402
Refer to the exhibit. A cisco collaboration engineer is troubleshooting a gateway and gatekeeper problem and sees this output from a debug command.
Which two configuration can cause this problem? (Choose two)
 

A.    The same zone prefix is configured in two different gatekeepers
B.    The same H323-ID is configured in two different gateways
C.    The same gw-type-prefix is configured in two different zone subnets IDs
D.    The same zone subnet ID is configured in two different gatekeepers
E.    The same E164-ID is configured in two different gateways

Answer: BE

QUESTION 403
The Cisco Unified Border Element is configured using high availability with the Hot Standby Routing Protocol. Which two pieces of information can be gathered about the calls traversing these border elements? (Choose two.)
 

A.    The total number of calls is 150.
B.    The number of non-native calls is 70.
C.    The number of native calls is 50.
D.    The number of calls preserved is 220.
E.    The total number of active calls is 100.

Answer: AB

QUESTION 404
Refer to the exhibit. Which two SIP packet handing behaviour will result with this cisco Unified Border Element (CUBE) configuration? (Choose two)
 

A.    Unsupported content/MIME pass-through
B.    SIP Refer is not support when received on this CUBE
C.    Privacy headers received on SIP message will be replaced with NON-privacy headers on this CUBE
D.    P-Preferred identities
E.    Mid-call codec changes

Answer: AE

QUESTION 405
A CUCM engineer has deployed Type B SIP Phones on a remote site and no SIP dial rules were deployed for these phones. How Will CUCM receive the DTMF after the phone goes off- hook and the button are pressed?

A.    Each digit will be received by CUCM in a SIP NOTIFY message as soon as they are pressed
B.    The first digit will be received in a sip invite and subsequent digits will be received using NOTIFY message as soon as they are pressed.
C.    Each digit bill be received by CUCM in a SIP INVITE as soon as the dial soft key has been pressed.
D.    All digits will be received by CUCM in a SIP INVITE as soon as the dial soft key has been pressed

Answer: A

QUESTION 406
The Video engineer wants to enable the LATM codec to allow video endpoint to communicate over audio With other IP devices Which two Characteristic should the voice engineer be aware of before enabling LATM on the Cisco Unified border element router? (Choose two)

A.    Dual tone Multi-frequency interworking with LATM codec is not supported
B.    Codec transcoding between LATM and other codecs is not supported
C.    SIP UPDATE message outlined in RFC3311 is not supported
D.    Box-to-Box High availability support feature is not supported
E.    Configure LATM under a voice class or dial peer is not supported
F.    Basic calls using flow-around or flow-through is not supported

Answer: AB


!!!RECOMMEND!!!

2016 Jul. Braindump2go New 400-051 Exam PDF and VCE Dumps 454Q&As Instant Download:

http://www.braindump2go.com/400-051.html [100% Exam Pass Promised!]

 

2016 Jul. Cisco 400-051 New Exam Questions – Google Drive:
https://drive.google.com/folderview?id=0B272WrTALRHcV0V4N2pvOUpFcUk&usp=sharing

[NEW UPDATED][FREE]Download Latest 400-051 Exam Questions from Braindump2go

CISCO NEWS: 400-051 Exam Questions has been Updated Today! Get Latest 400-051 VCE and 400-051 PDF Instantly! Welcome to Download the Newest Braindump2go 400-051 VCE&400-051 PDF Dumps: http://www.braindump2go.com/400-051.html (394 Q&As)

Exam Code: 400-051
Exam Name: CCIE Collaboration Written
Certification Provider: Cisco

400-051 Dump,400-051 Braindump,400-051 Study Guide,400-051 PDF,400-051 VCE,400-051 Exam Questions,400-051 CCIE Collaboration Dumps,400-051 Practice Exam,400-051 Practice Test

QUESTION 349
An engineer notices that two Cisco utility Connection servers in a cluster are in split-brain mode. The engineer corrects a network issue that allows the two servers to communicate again.
Which two statements describe negative effects of this event? (Choose two)

A.    A user calling in to check their voicemail during the recovery may be informed that their messages are not available.
B.    Message waiting lights van become out of sync after the split-brain recovery.
Forcing the administrator to run an MWI Synchronization.
C.    The replication between the nodes becomes defunct, requiring the administrator to run utils cuc cluster activate to re-establish intracluster.
D.    A message left on the subscriber server during the outage may be lost during the cluster recovery.
E.    The replication between the nodes becomes defunct, requiring the administrator to run utils cuc cluster renegotiate to re-establish intracluster communication.
F.    The Unity Connection Database can become corrupted, causing the need to reinstall the subscriber server.

Answer: AC

QUESTION 350
Which two power saving parameters are available on a Cisco 9971 IP Phone only when it is connected to a Cisco switch with the EnergyWise feature enabled? (Choose two)

A.    Enable Power Save Plus
B.    Power Negotiation
C.    Phone On Time
D.    Display on Time
E.    LLDP Power Priority
F.    Day Display Not Active

Answer: AC

QUESTION 351
What is the maximum number of configurable speed dial entries for a Cisco Unified 9971 IP Phone?

A.    4
B.    199
C.    50
D.    3
E.    2

Answer: B

QUESTION 352
Which two softkeys can be offered on a Cisco IP Phone 7965, running SCCP firmware, when it is in Connected Conference state? (Choose two)
A.    EndCall
B.    Trnsfer
C.    Join
D.    RmLstC
E.    Select
F.    Confrn

Answer: AF

QUESTION 353
Which two SCCP call states support the CallBack softkey? (Choose two)

A.    On Hook
B.    Remote In Use
C.    Connected Transfer
D.    Ring In
E.    Off Hook
F.    Connected Conference

Answer: AC

QUESTION 354
Where can a Cisco Unified CM administrator define Billing Application Server(s) for Call Detail Records?

A.    Cisco Unified Serviceability
B.    Service Parameters in Cisco Unified CM Administration.
C.    Enterprise Parameters in Cisco Unified CM Administration.
D.    Cisco Unified Reporting.
E.    Call Detail Records data collection internal is not a configurable parameter.

Answer: A

QUESTION 355
An engineer is configuring QoS for a 100 Mb WAN link. An ISP SLA was signed to support 70% of the link. Which QoS command allows the engineer to use 70% of the link while maintaining a steady flow?

A.    traffic-shape rate 100000000 70000000 70000000
B.    police cir 70000000 confirm-action transmit exceed-action drop
C.    police 70000000 13125000 confirm-action transmit exceed-action drop
D.    traffic-shape rate 70000000 8750000 8750000

Answer: D

QUESTION 356
A collaboration engineer is designing a phone VPN infrastructure and the company security team requires Active Directory for authentication. Which two phone VPN configurations meet this requirement? (Choose two)

A.    user ID and password authentication
B.    certificate-only authentication
C.    auto-network-detect authentication
D.    password-only authentication
E.    Cisco ASA Host ID check authentication
F.    Cisco Unified CM user ID and password authentication

Answer: CE

QUESTION 357
What is the default data collection interval for Call Detail Records on Cisco Unified CM?

A.    60 seconds
B.    1 seconds
C.    1440 seconds
D.    600 seconds
E.    3600 seconds

Answer: A

QUESTION 358
Which three softkeys can be offered on a Cisco IP Phone 7965, running SCCP firmware, when it is in Ring In state? (Choose three)

A.    iDivert
B.    DND
C.    Answer
D.    NewCall
E.    EndCall
F.    CallBack

Answer: ABC


FREE DOWNLOAD: NEW UPDATED 400-051 PDF Dumps &400-051 VCE Dumps from Braindump2go: http://www.braindump2go.com/400-051.html (394 Q&As)

[100% PASS GUARANTEED] Cisco 400-051 Free Braindumps – Pass 400-051 Exam With Braindump2go Free Cisco 400-051 Q&As

CISCO OFFICIAL: New Updated 400-051 Exam Questions from Braindump2go 400-051 PDF Dumps and 400-051 VCE Dumps! Welcome to Download the Newest Braindump2go 400-051 VCE&PDF Dumps: http://www.braindump2go.com/400-051.html (347 Q&As)

The 400-051 Exam Practice Questions and Answers are ideal for the aspring candiates to grab exceptional grades in Cisco 400-051 Exam! The 400-051 Questions and Answers are developed using the latest updated course content and all the answers are verified to ensure phenoment preparation for the actual 400-051 Exam!

Read more

Pages:  1 2
1 2